Invacare 5890IVC Owners Manual - Page 23
Installing the Casters
View all Invacare 5890IVC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
4.7 Installing the Casters If low bed ends were ordered, proceed to 4.9 Installing Low Bed Ends, page 25, instead of performing this procedure. WARNING! Risk of Injury or Damage To avoid damage or personal injury from instability: - Ensure that the locking casters are installed diagonally from each other and are locked. ALWAYS locate locking casters in the same location on each bed end so that they will always be assembled diagonally opposite each other when inventory is mixed. If two locking casters are not included with the bed, contact a qualified dealer. Set-up 1. To install casters A, lay the bed ends B flat on the floor. 2. Insert the shaft of caster assembly C into the caster socket D. 3. To prevent excess movement of the bed during assembly, lock each of the two locking casters by pushing down on the caster lock. E Locking the casters may not prevent the bed from moving on slick or slippery surfaces. 4. To unlock each of the two locking casters, pull up on the caster lock F. 1114836-H-05 23