Intermec IF61 GPIO Terminal Block User's Guide - Page 10

Installing the Terminal Block Note: For IP54 compatibility, mount the terminal block with the connector side facing toward the floor. You need these tools to install the terminal block: • Drill and drill bits appropriate for the mounting surface • Small straight-slot and Phillips screwdrivers • Wire crimping and stripping tool Note: The terminal block includes four #6 x 2-inch wood screws you can use for mounting, or you can supply your own mounting hardware. To install the terminal block 1 Choose a location for the terminal block. 2 Drill four mounting holes. Use the included drilling template (P/N 931-008-001). 3 Remove the top cover from the terminal block. 4 Place the terminal block in the location and secure it to the mounting surface with four appropriate fasteners. Mounting hardware (4 places) 10 GPIO Terminal Block User's Guide