Intel S845WD11U Product Guide - Page 53

Connecting the IDE Cable,

Get Intel S845WD11U PDF manuals and user guides View all Intel S845WD11U manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

Connecting the IDE Cable The Intel® boxed server board package includes a 40-contact, 80-conductor IDE cable. It is capable of connecting two drives to the server board. The cable supports Ultra ATA/66 and Ultra ATA/100 transfer protocols and is backward compatible with drives using slower IDE transfer protocols. For the cable to function correctly: • Attach the cable end with the single connector (A), which is black and labeled PRI IDE, to the server board as shown in Figure 13. • Attach the cable end with the two closely spaced connectors (B), which are gray and black and are labeled P2 and P3, to the drives. • If connecting only one IDE drive, be sure to connect the drive to the gray connector (P3). B A OM14345 Figure 13. Connecting the IDE Cable Server Board Installation and Upgrading 53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
Connecting the IDE Cable
The Intel
®
boxed server board package includes a 40-contact, 80-conductor IDE cable.
It is capable
of connecting two drives to the server board. The cable supports Ultra ATA/66 and Ultra ATA/100
transfer protocols and is backward compatible with drives using slower IDE transfer protocols.
For the cable to function correctly:
•
Attach the cable end with the single connector (A), which is black and labeled PRI IDE, to the
server board as shown in Figure 13.
•
Attach the cable end with the two closely spaced connectors (B), which are gray and black and
are labeled P2 and P3, to the drives.
•
If connecting only one IDE drive, be sure to connect the drive to the gray connector (P3).
OM14345
A
B
Figure 13.
Connecting the IDE Cable
Server Board Installation and Upgrading
53