Image Fitness 3.0 Bench English Manual - Page 8
Lubricate
View all Image Fitness 3.0 Bench manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
7. Attach the Seat (9) to the Seat Frame (5) with four 7 M6 x 16mm Screws (28). 9 5 . .• o o • 0 28 28 d 8. Lubricate an M10 x 170mm Bolt (24). See inset drawing A. Insert the Bolt through one Backrest 8 Tube (10) and into the Adjustment Bracket (14) as shown. This will hold the Adjustment Bracket and Backrest Tubes in place. 5 Welded Tube Slide the Seat Frame (5) into the Adjustment Bracket (14). Align the welded tube in the Seat Frame with the holes in the Adjustment Bracket and the Backrest Tubes (10) as shown in inset drawing B. Insert the M10 x 170mm Bolt (24)-through the Seat Frame and the other Backrest Tube. Tighten an M1011ylon Locknut (22) onto the Bolt. 0 °j•II 10 22- 0 • • • o -. e' i 0---24 14 9. Lubricate the M10 x 76mm Bolt (26). Attach the Leg Lever (6) to the Seat Frame (5) with the Bolt and an M10 Nylon Locknut (22). A 10 • B _ _ 14 f 24 Insert Bolt to Here 9 24 22 14 5 22 • 5 •♦• • • " 0 s --, , „ '. 0 6 26 Lubricate 0 _ 8