Hotpoint RA720KWH Installation Instructions - Page 14
Installation Instructions - model
UPC - 084691131663
View all Hotpoint RA720KWH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Installation Instructions PREPARE TO INSTALL THE RANGE MATERIALS YOU MAY NEED 2 PREPARE THE OPENING (UL Approved 40 AMP) 4-Wire Cord OR 3-Wire Cord 4' Long 4' Long Squeeze Connector (For Conduit Installations Only) TOOLS YOU WILL NEED Drill with 1/8" Bit Safety Glasses • Allow 2″ spacing from the range to adjacent vertical walls above the cooktop surface. Allow 30″ minimum clearance between the surface units and the bottom of unprotected wood or metal top cabinet, and 15″ minimum between the countertop and adjacent cabinet bottom. • To eliminate the risk of burns or fire when reaching over hot surface elements, cabinet storage space above the cooktop should be avoided. If cabinet storage space is to be provided above the cooktop, the risk can be reduced by installing a range hood that protrudes at least 5″ beyond the front of the cabinets. Cabinets installed above a cooktop may be no deeper than 13″. B Adjustable Wrench Pliers Tape Measure Pencil 13″ max. 30″ min. 15″ min. A 5″ 21⁄2″ 2″ 401⁄2″ height 36″ max. From combustible walls above cooking C surface either side 36″ Surface Wall Mounted mount 1/4" Nut Driver Level Wall outlet Phillips Screwdriver PARTS INCLUDED Flat-blade Screwdriver Outlet box D (depth with door open) 21⁄4″ Floor Cord Recommended acceptable electrical outlet area. Orient the electrical receptacle so the length is parallel to the floor. Models A B C D 20 ″ Wide 20 ″ 20 3⁄8″ 2″ 41″ 24 ″ Wide 24 ″ 24 3⁄8″ 2″ 41″ Anti-Tip Bracket Kit 1 REMOVE SHIPPING MATERIALS Remove packaging materials. Failure to remove packaging materials could result in damage to the appliance. Flooring under the range Your range, like many other household items, is heavy and can settle into soft floor coverings such as cushioned vinyl or carpeting. When moving the range on this type of flooring, it should be installed on a 1/4″ thick sheet of plywood (or similar material) as follows: When the floor covering ends at the front of the range, the area that the range will rest on should be built up with plywood to the same level or higher than the floor covering. This will allow the range to be moved for cleaning or servicing. 14