Hotpoint GFC530F Installation Instructions - Page 7
Installation Instructions, CONNECTING DISPOSER TO SINK FLANGE
View all Hotpoint GFC530F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Installation Instructions 4 CONNECTING DISPOSER TO SINK FLANGE 1 ATTACH TO SINK FLANGE Line up the disposer under the sink flange. Guide the hopper projections into the mount ring slots. Turn the mount ring about 1/4″ to the right so that the disposer is temporarily supported. Mount Ring Slot Hopper Projection 3 LOCK MOUNT RING Turn the mount ring slowly to the right until it locks up tight. Hopper projections must be to the extreme left of the mounting slots. If the mount ring is hard to turn, you may add a small amount of petroleum jelly or liquid soap to the hopper projection. Run water and check for leaks. 2 LINE UP WITH OUTLET PIPE Turn the mount ring and the disposer until the disposer discharge elbow lines up with the outlet pipe (see page 8). Locking Detail Hopper Projection in "Supported" Position Discharge Elbow Outlet Pipe Hopper Projection in "Locked" Position Mounting Slot Mount Ring 4 CHECK FOR LEAKS Check the unit for leaks 24 hours after installation and first operation. 7