Hotpoint GFC530F Installation Instructions - Page 6
Installation Instructions, DISHWASHER CONNECTION IF REQUIRED, ATTACHINGTHE DISCHARGE ELBOW
View all Hotpoint GFC530F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Installation Instructions 2 DISHWASHER CONNECTION (IF REQUIRED) If you are connecting to a dishwasher, complete the following step. If a dishwasher is not to be connected, go on to "Attaching the Discharge Elbow" section. 1 KNOCK OUT PLUG Using a blunt instrument (steel punch or wooden dowel), knock out entire plug. Do not use a screwdriver or sharp instrument. When knockout plug falls into disposer, you may remove it or simply grind it up when the disposer is used. This will not damage the disposer in any way, but may take some time to grind, over the course of several uses. Knock out plug 2 CONNECT HOSE Connect the dishwasher hose using a hose clamp. If the hose size is different, you will need a stepped rubber adapter. Hose Clamp Stepped Rubber Adapter 3 ATTACHING THE DISCHARGE ELBOW CONNECT DISCHARGE ELBOW Connect the discharge elbow to the disposer.* Make sure all plumbing connections are tight. * Some installations (see page 8 for examples) may require the use of a flexible drain pipe. Rubber Gasket Discharge Elbow 6