Hoover F5835 Manual - Page 5
Upfront tool storage
View all Hoover F5835 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
1-10 E 1-11 G F IH G H Storing hose Stretch hose out and identify ends. E. Nozzle connector end of hose G. Solution tube F. Trigger H. Converter end of hose Note: You may find it helpful when storing the hose to refer to the information on the back of the deep cleaner and on the converter end of the hose. Start with converter end of hose (H). Fit converter over tab near tool holder (I). Press converter firmly to snap in place. Press solution tube (G) into clip next to converter as shown. 1-12 K J 1-13 K 1-14 Wrap hose around hook on upper handle (J). Press hose into clips on upper hose holder (K). Wrap hose around lower tool holder and continue until nozzle connector is near upper hose holder. Clip hose in place. Press cord into cord clip on back of hose holder. Pull cord tight. Upfront tool storage 1-15 1-16 1-17 Powered hand tool The powered hand tool is shipped in a plastic bag for protection. Remove the bag before using the tool by first opening tool door. To remove tool (A), pull it down and outward. To reposition the tool, reverse this procedure. How to reattach tool cover The tool cover is designed with a breakaway feature which allows it to snap free if it is pushed open too far. To reattach, align hinges of cover with slots on sides of tool storage area. Push cover down to secure in place. Continued 5