Hitachi PJTX200 User Manual - Page 40

ENGLISH Basic operation To save adjustment settings Note that if the MESSAGE function (51) is inactive, the following procedure cannot be performed and the projector will load saved adjustment settings as soon as the MEMORY button is pressed. When the MESSAGE function is inactive please use the MY MEMORY function in the PICTURE menu (42) to save adjustment settings. When the MESSAGE function is active, the MY MEMORY menu can be displayed using the following procedure. The MY MEMORY menu displayed is the same as in the PICTURE menu. You cannot only save adjustment settings but also change and rename previously saved adjustment settings via this menu. 1. Press the MEMORY button once. The projector will display a dialog to indicate the current adjustment settings.  When the current adjustment settings are from one of the saved memories a dialog shows which memory is being used. 1.CUSTOM‑1  When the current settings are not saved to memory the following dialog is displayed. Temporary condition ENTER ; Save these parameters MEMORY ; Recall saved parameters ; Quit 2. Press the ENTER button while the dialog is displayed to open the MY MEMORY menu and save to the currently selected memory. 3. Please refer to the MY MEMORY item under PICTURE menu (42) for more information on using the MY MEMORY menu. MY MEMORY :SELECT NAME CUSTOM‑1 BRIGHTNESS ＋0 CONTRAST ＋0 GAMMA STANDARD COLOR TEMP 6500K COLOR +0 TINT +0 SHARPNESS +3 IRIS 10 BLACK TURN OFF WHISPER NORMAL DIGITAL SHUTTER TURN OFF SAVE M E NU :QUIT NOTE • The numbers to the left of each memory cannot be changed but the name to the right can be changed. • The MY MEMORY function can also be accessed via the PICTURE menu in the Advanced Menu (42). 29