Hitachi CPA100 User Manual - Page 64
Maintaining the air-filter, continued
UPC - 050585151314
View all Hitachi CPA100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Maintenance Maintaining the air-filter (continued) NOTE • A filter unit of specified type will come with the replacement lamp for this projector. Replacing the filter unit at the same time with the lamp is recommended. • Please reset the filter time only when you have cleaned the air-filter, for a suitable indication about the air-filter. • The projector may display the message such as "CHECK THE AIR FLOW" or turn off the projector, to prevent the internal heat level rising. WARNING ►Before taking care of the air-filter, make sure the power switch is off and the power cable is not plugged in, then allow the projector to cool sufficiently. Taking care of the air-filter in a high temperature state of the projector could cause an electric shock, a burn or malfunction to the projector. ►Use only the air-filter unit of the specified type. Do not use the projector without the air-filter or the filter cover. It could result in a fire or malfunction to the projector. ►Clean the air-filter periodically. If the air-filter becomes clogged by dust or the like, internal temperatures rise and could cause a fire, a burn or malfunction to the projector. 64