Hitachi CPA100 User Manual - Page 61
Replacing the lamp - ceiling mount
UPC - 050585151314
View all Hitachi CPA100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Maintenance Maintenance Replacing the lamp The projection lamp has finite product life that is different in each lamp. Please replace the lamp as soon as possible when the pictures appear dark, or when the color tone is poor. Using the lamp for long periods of time may make the lamp burned out or broken. Preparation of a spare lamp and early replacement are recommended. To prepare the new lamp, call your dealer and tell the type number: DT00891 1. Turn the projector off and unplug the power cord from the power outlet. And cool the projector down by leaving it for about 45 minutes as it is. When the projector is mounted on a ceiling or somewhere over your head, or when the lamp may have been broken, be sure to refer replacement to your dealer or service person, since it may be dangerous. Only in case of replacement by yourself, follow the following procedure. 2. Loosen the screw (marked by arrow) of the lamp cover, and then slide the lamp cover to the side to remove it. Lamp cover 3. Loosen the 2 screws (marked by arrows) of the lamp, and slowly pick up the lamp by the handles. 4. Insert the new lamp, with cautions not to touch the inside of the lamp house. When inserting, pay attention to the socket position first, and to the pins for positioning next. 5. Tighten firmly the 2 screws of the lamp that are loosened in the previous process to lock it in place. 6. Slide the lamp cover into place and firmly tighten the screw of the lamp cover. Screw Pin for positioning Socket 7. Plug in and restart the projector (12, 16). Lamp house Then, reset the lamp time (which is the time (inside of the counter for the lamp use). lamp cover) (1) Press the ▲ or ▼ button on the projector or the MENU button on the remote control. The "EASY MENU" appears. Screw (2) Point at the "Go to Advanced Menu ..." Pin for positioning in the menu using the ▲ or ▼ button, then press the ► button. "MENU" appears. (3) Pointed at the "OPTION" in the left column using the ▲ or ▼ button, then press the ► button. The cursor moves to the right column. (4) Pointed at the "LAMP TIME" using the ▲ or ▼ button, then press the ► button. A dialog appears. (5) Press the ▲ button to select the "RESET" on the dialog. It performs resetting the lamp time. 61