HP XP P9500 HP StorageWorks P9000 Configuration Guide (AV400-96380, May 2011) - Page 106
Creating a Storage Repository, Storage, New SR
![]() |
View all HP XP P9500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
7. Open a command line interface to the dom0 and edit the /etc/multipath-enable.conf file with the appropriate array. NOTE: HP recommends that you use the RHEL 5.x device mapper config file and multipathing parameter settings on HP.com. Use only the array-specific settings, and not the multipath.conf file bundle into the device mapper kit. All array host modes for Citrix XenServer are the same as Linux. 8. Enter the following command to scan the LUNs that are connected to the arrays: xe sr-probe type=lvmhba Creating a Storage Repository Follow these steps to create a Storage Repository using XenCenter. 1. Open XenCenter, create a pool, and then add all of the dom0s to the pool. 2. Select one of the dom0s in the pool, click the Storage tab, and then click New SR. 106 Citrix XenServer Enterprise
![](/manual_guide/products/hewlettpackard-p9000-hp-storageworks-p9000-configuration-guide-av40096380-2011-d06c355/106.png)