HP Server Console 0x2x16 HP IP Console Switchwith Virtual Media Installation I - Page 5

Performing a cantilever-mount type A installation, appropriate number of T-25 Torx screws.

Get HP Server Console 0x2x16 PDF manuals and user guides View all HP Server Console 0x2x16 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

Performing a cantilever-mount type A installation 1. Remove the four screws, two on each side, from the console switch. 2. Attach the 1U brackets to the console switch using the four screws that you removed. Performing a cantilever-mount type B installation 1. Remove the four screws, two on each side, from the console switch. 2. Attach the 1U brackets to the console switch using the four screws that you removed. 3. Install up to six clip nuts. 3. Install up to six cage nuts. 4. Secure the console switch to the rails, using the appropriate number of T-25 Torx screws. 4. Secure the console switch to the rails using the appropriate number of M-6 screws.

  • 1
  • 2
  • 3
  • 4
  • 5
Performing a cantilever-mount type A
installation
1.
Remove the four screws, two on each side, from the
console switch.
2.
Attach the 1U brackets to the console switch using the
four screws that you removed.
3.
Install up to six clip nuts.
4.
Secure the console switch to the rails, using the
appropriate number of T-25 Torx screws.
Performing a cantilever-mount type B
installation
1.
Remove the four screws, two on each side, from the
console switch.
2.
Attach the 1U brackets to the console switch using the
four screws that you removed.
3.
Install up to six cage nuts.
4.
Secure the console switch to the rails using the
appropriate number of M-6 screws.