HP R7000 UPS R1500 XR Models Installation Instructions - Page 1

HP R7000 Manual

Page 1 highlights

hp uninterruptible power system R1500 xr models installation instructions Read Instructions Completely Before Beginning Installation Procedures Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained herein. The information in this document is provided "as is" without warranty of any kind and is subject to change without notice. The warranties for HP products are set forth in the express limited warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty. HP Uninterruptible Power System R1500 XR Models Installation Instructions Second Edition (August 2002) Part Number 215859-022 Overview These instructions show how to install an uninterruptible power system (UPS). For detailed information about the UPS, refer to the UPS user guide on the Power Products Documentation CD. Important Safety Information Before installing this product, read the Important Safety Information document provided. WARNING: To prevent personal injury from electric shock and hazardous energy levels, the installation of options and routine maintenance and service of this product must be performed by individuals who are knowledgeable about the procedures, precautions, and hazards associated with AC power products. WARNING: To prevent personal injury from earth conductor leakage current: • Do not operate a UPS that is disconnected from the utility power source. • Disconnect protected devices from the UPS before disconnecting the UPS from utility power. • Use the Test/Alarm Reset button to test the batteries rather than unplugging the UPS. Refer to the UPS user guide for more information on the operation of the UPS. Regulatory Compliance Identification Numbers For regulatory compliance certifications and identification purposes, the UPS models are assigned a series number, also identified on the Regulatory Compliance label located on the side of the UPS. For certification information, always refer to the series number: • R1500 XR NA series number: EO3008 • R1500 XR JPN series number: EO3008j • R1500 XR H INT'L series number: EO3008i NOTE: The rating label on the device provides the class (A or B) of the equipment. Class B devices have a Federal Communications Commission (FCC) logo or FCC ID on the label. Class A devices do not have an FCC logo or FCC ID on the label. After you determine the class of the device, refer to the UPS user guide for complete regulatory compliance notices. Weight 24 kg 52 lb WARNING: The UPS weighs 24 kg (52 lb) when fully assembled. To prevent personal injury or damage to the equipment: • Observe local occupational health and safety requirements and guidelines for manual material handling. • Obtain adequate assistance to lift and stabilize the product during installation or removal. The UPS is unstable when not fastened to the rails. • Remove the battery pack to reduce the overall weight of the product. 215859- 022

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7

hp uninterruptible
power system
R1500 xr models
installation instructions
Read Instructions Completely
Before Beginning Installation Procedures
Hewlett-Packard Company shall not be liable for technical or editorial errors or
omissions contained herein. The information in this document is provided “as is”
without warranty of any kind and is subject to change without notice. The warranties
for HP products are set forth in the express limited warranty statements
accompanying such products. Nothing herein should be construed as constituting an
additional warranty.
HP Uninterruptible Power System R1500 XR Models Installation Instructions
Second Edition (August 2002)
Part Number 215859-022
215859- 022
Overview
These instructions show how to install an uninterruptible power
system (UPS). For detailed information about the UPS, refer to the
UPS user guide on the Power Products Documentation CD.
Important Safety Information
Before installing this product, read the
Important Safety
Information
document provided.
WARNING:
To prevent personal injury from electric shock and
hazardous energy levels, the installation of options and routine
maintenance and service of this product must be performed by
individuals who are knowledgeable about the procedures,
precautions, and hazards associated with AC power products.
WARNING:
To prevent personal injury from earth conductor
leakage current:
Do not operate a UPS that is disconnected from the utility
power source.
Disconnect protected devices from the UPS before
disconnecting the UPS from utility power.
Use the Test/Alarm Reset button to test the batteries rather
than unplugging the UPS. Refer to the UPS user guide for
more information on the operation of the UPS.
Regulatory Compliance
Identification Numbers
For regulatory compliance certifications and identification
purposes, the UPS models are assigned a series number, also
identified on the Regulatory Compliance label located on the
side of the UPS. For certification information, always refer to
the series number:
R1500 XR NA series number: EO3008
R1500 XR JPN series number: EO3008j
R1500 XR H INT’L series number: EO3008i
NOTE:
The rating label on the device provides the class (A or B) of the
equipment. Class B devices have a Federal Communications Commission
(FCC) logo or FCC ID on the label. Class A devices do not have an FCC logo
or FCC ID on the label. After you determine the class of the device, refer to
the UPS user guide for complete regulatory compliance notices.
Weight
24 kg
52 lb
WARNING:
The UPS weighs 24 kg (52 lb) when fully
assembled. To prevent personal injury or damage to
the equipment:
Observe local occupational health and safety
requirements and guidelines for manual material
handling.
Obtain adequate assistance to lift and stabilize the
product during installation or removal. The UPS is
unstable when not fastened to the rails.
Remove the battery pack to reduce the overall
weight of the product.