HP R1.5 UPS R6000 Models User Guide - Page 32
Status, UPS Status + Receptacle Status, UPS Status + Active Alarm Count, Table 3-2
View all HP R1.5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
LCD Configuration and Status Status Select Status on the Main Menu and press the Enter button to view the status or active alarms for the UPS. Main Menu → Status UPS Status + Receptacle Status Select UPS Status + Receptacle Status from the Status menu to view information about the system. The following LCD display example shows that the UPS has detected no problems. Load segments 1, 4, and 5 are on. Load segments 2 and 3 are off. System Normal ON: 1 - - 4 5 UPS Status + Active Alarm Count Select UPS Status + Active Alarm Count from the Status menu to view the number of current alarms. In this example, the UPS has detected no problems and there are no alarms. System Normal 0 Alarms Table 3-2: Active Alarm Count Options LCD Display On Battery x Alarms On Bypass x Alarms Load Power Off x Alarms Load Power On x Alarms Overload x Alarms Explanation The UPS has switched from utility voltage input to battery power. The UPS has been placed in Bypass mode. The power feeding the UPS-protected devices has terminated. Utility power has been restored to the devices backed up by the UPS. There are too many loads attached to the UPS. HP Uninterruptible Power System R6000 Models User Guide 3-5