HP FM811UT#ABA Service Guide - Page 91
ExpressCard board, Remove the TouchPad assembly
![]() |
UPC - 884962115381
View all HP FM811UT#ABA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Remove the TouchPad assembly: 1. Hold the top cover above the work surface. 2. Release the TouchPad assembly (1) by pushing up on the front edge of the assembly from underneath the top cover. 3. Remove the TouchPad assembly (2) by sliding it up and forward at an angle Reverse this procedure to install the TouchPad assembly. ExpressCard board Description ExpressCard board (includes RTC battery) Spare part number 487119-001 Before removing the ExpressCard board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC Adapter from the computer. 4. Remove the battery (see Battery on page 46). 5. Remove the following: a. Hard drive (see Hard drive on page 52) b. Optical drive (see Optical drive on page 55) c. Keyboard (see Keyboard on page 60) d. Switch cover (see Switch cover on page 65) Component replacement procedures 83
![](/manual_guide/products/hewlettpackard-fm811utaba-service-guide-5d466a6/91.png)