HP EliteBook G1 Maintenance and Service Guide - Page 45
WLAN/Bluetooth combo card, Remove the Phillips M2.0×2.0 screw
![]() |
View all HP EliteBook G1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
WLAN/Bluetooth combo card Description Intel Wireless-AC 9560 802.11ac 2x2 WiFi + BT 5 Combo Adaptor (vPro) Intel Wireless-AC 9560 802.11ac 2x2 WiFi + BT 5 Combo Adaptor (non vPro) Spare part number L32652-005 L32650-005 Before removing the WLAN module, follow these steps: 1. Shut down the computer. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 29). 5. Remove the battery (see Battery on page 31). Remove the WLAN module: 1. Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module. NOTE: The WLAN antenna cable labeled '1' connects to the WLAN module "Main" terminal labeled '1'. The WLAN antenna cable labeled '2' connects to the WLAN module 'Aux' terminal labeled '2'. If the computer is equipped with an 802.11a/b/g/n WLAN module, the yellow WLAN antenna cable connects to the middle terminal on the WLAN module. 2. Remove the Phillips M2.0×2.0 screw (2) that secures the WLAN module to the computer. (The edge of the module opposite the slot rises away from the computer.) Component replacement procedures 37
![](/manual_guide/products/hewlettpackard-elitebook-1050-maintenance-service-guide-5ced206/45.png)