HealthRider H90t Treadmill English Manual - Page 21
of three minutes, see HOW TO CREATE A CUS
View all HealthRider H90t Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
HOW TO USE A CUSTOM WORKOUT 1. Insert the key into the console. See HOW TO TURN ON THE POWER on page 16. 2. Select a custom workout. To select a custom workout, press the one of the Custom buttons repeatedly. When a custom workout is selected, the displays will show the maximum speed setting and the duration of the workout. In addition, a profile of the speed settings of the workout will scroll across the matrix. Note: If the display shows a workout duration of three minutes, see HOW TO CREATE A CUSTOM WORKOUT on page 20. 3. Start the walking belt. Press the Start button or the Speed increase button to start the workout. A moment after you press the button, the treadmill will automatically adjust to the first speed and incline settings that you programmed previously. Hold the handrails and begin walking. cline setting for the current segment, simply press the speed or incline buttons. When the current segment ends, the new setting will be saved in memory. To increase the length of the workout, first wait until the workout is completed. Then, press the Start button and program speed and incline settings for as many additional segments as desired. When you have added as many segments as desired, press the Stop button twice. To decrease the length of the workout, press the Stop button twice at any time before the workout is completed. To stop the workout temporarily, press the Stop button. To restart the workout, press the Start button. The walking belt will begin to move at 1 mph. When the next segment of the workout begins, the treadmill will automatically adjust to the speed and incline settings programmed for the next segment. 4. Follow your progress with the displays. See step 5 on page 17. 5. Measure your heart rate if desired. See step 6 on page 18. Each custom workout is divided into several oneminute segments. One speed setting and one incline setting are programmed for each segment. Note: The same speed and/or incline setting may be programmed for consecutive segments. The custom workout will function in the same way as a preset workout (see step 3 on page 19). 6. Turn on the fans if desired. See step 7 on page 18. 7. When you are finished exercising, remove the key from the console. See step 8 on page 18. If desired, you can redesign the workout while using it. To change the speed setting or the in- 21