HealthRider H90t Treadmill English Manual - Page 11

10. With the help of a second person, hold the console assembly near the Uprights (77). Connect the Upright Wire (76) to the console wire extending from the console assembly. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Remove the wire tie from the Upright Wire (76). Insert the excess wire into the right Upright (77) as you set the console assembly on the Uprights. Be careful not to pinch any wires. 10 77 Console Assembly Wire Tie Console Wire 76 77 Console Wire 76 11. Attach the console assembly to the Uprights (77) with four 3/8" x 1 1/4" Patch Bolts (9) and four 3/8" Star Washers (11). Start all four Patch Bolts, and then tighten each of them. 11 Console Assembly 11 11 9 11 9 77 9 77 11 9 11