GE JVW5301EJES Use and Care Manual - Page 9
Surfaces, Lights Pyramid Models JVW5301, JVW5361, CARE AND CLEANING
![]() |
View all GE JVW5301EJES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
CARE AND CLEANING: Surfaces/Lights Surfaces Stainless Steel Surfaces (on some models) Do not use a steel wool pad; it will scratch the surface. To clean the stainless steel surface, use warm sudsy water or a stainless steel cleaner or polish. Always wipe the surface in the direction of the brush line. Follow the cleaner instructions for cleaning the stainless steel surface. Cleaners with oxalic acid such as Bar Keepers Friend Soft Cleanser™ will remove surface rust, tarnish, and small blemishes. Use only a liquid cleanser free of grit and rub in the direction of the brush lines with a damp soft sponge. To inquire about purchasing stainless steel appliance cleaner or polish, or to find the location of a dealer nearest you, please call our toll-free number: National Parts Center 800.626.2002 GEApplianceParts.com Painted Surfaces (on some models) Do not use a steel wool pads or other abrasive cleaners; they will scratch the surface. Clean grease-laden surfaces of the hood frequently. To clean the hood surface, use a hot, damp cloth with a mild detergent suitable for painted surfaces. About one tablespoon of ammonia may be added to the water. Use a clean, hot, damp cloth to remove soap. Dry with a dry, clean cloth. NOTE: When cleaning, take care not to come in contact with filters and other non-enameled surfaces. CAUTION: When cleaning the hood surfaces, be certain that you do not touch the light with moist hands or cloth. A warm or hot light may break if touched with a moist surface. Always let the light cool completely before cleaning around it. Lights (Pyramid Models JVW5301, JVW5361) CAUTION: Allow lights to cool before touching. To change the lights: 1. Before attempting to replace the lights, make sure that the light switch is turned off. 2. Using a flathead screwdriver, unclip the wire lighting support and gently pull the support down from the hood. 3. While holding the socket, twist the light counterclockwise to remove. Replace it with a new GU-10 light. Make sure the new light is locked in the socket. 4. Replace the new light and socket into the hood and engage into the light support. 49-80760 9
![](/manual_guide/products/general-electric-pvw7361sjss-use-care-manual-6a70261/9.png)