GE CGU366SEHSS Installation Instructions - Page 9
Installation
View all GE CGU366SEHSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Installation STEP 1 CUT THE COUNTERTOP OPENING 48" wide models are designed to fit in 48" or wider base cabinets Measure carefully when cutting the countertop. Make sure sides of the opening are parallel. • Allow 8" free space below the top surface of the countertop. • Allow additional clearances below the burner box to install the regulator and make house supply connections. Use a 90° elbow to route the gas connections and limit interference with drawers or other cabinetry features. • These rangetops are designed to hang from the countertop by their side flanges. • Smooth any rough edges on the countertop before installing the rangetop. - Formica countertop edges must be finished. The countertop must be strong enough to support the weight of the rangetop. 36" wide models are designed to fit in 36" or wider base cabinets Cutout Opening with False Bottom Dimensions A (Dia.) B C D 36" Rangetop 7-3/8" 1-1/2" 7-1/2" 11-1/8" 48" Rangetop 8-1/4" 1-1/2" 7-1/2" 11-1/8" • You can construct the cutout with a false bottom to conceal the bottom of the rangetop. - Build the false bottom using a solid material; cut a 7-1/2" x 11-1/8" hole in the left rear corner for the gas inlet and power cord clearances. 9