GE CGU366SEHSS Use and Care Manual - Page 17

Grill grate, frame and baffle (on some models) Care and Cleaning Professional Rangetops The IR Grill should be cleaned immediately after each use. &OHDQWKH*ULOO*UDWH Turn the burner to OFF. Use a barbecue mitt to remove the hot grill grate. Place the grill grate in a basin or sink and scrub with a brass bristle brush. Rinse frequently. The grill grate may also be cleaned in the oven during the self-cleaning cycle, or, it can be cleaned in the dishwasher. &OHDQWKH*ULOO*UDWH)UDPH The grill grate frame can be cleaned by hand or in the dishwasher. Do not clean the grill grate frame in a self-cleaning oven. The grill grate frame has rubber pads on each bottom corner. Be careful not to damage the pads during the cleaning process. &OHDQWKH5DGLDQWEDIIOH Lift the baffle out of the pan. Clean the baffle with hot soapy water or in the dishwasher. &OHDQWKH3DQ6XUURXQG:LUH0HVK The pan surround and wire mesh cannot be removed. Clean them in place. Use a soft damp cloth to clean the pan surround. Gently brush food particles into the grease trough or use a vacuum cleaner for excess debris. ,03257$17 Keep the grill burner and ceramic igniter dry. Do not spray water or cleaner directly onto the wire mesh or igniter. Avoid contact with the igniter, it is fragile and can chip or break. 5HDVVHPEOHWKH*ULOO Reverse the steps above to reassemble the grill. The radiant baffle support tabs should engage the pins on the side of the pan surround. Replace the grate frame. Be sure to engage the bottom locator pin with the pin hole at the left rear side of the pan. Replace the grill grate with the handle end towards the front of the rangetop. 1. Grill Grate 2. Grate Frame Support Tabs 3. Radiant Baffle 4. Pan Surround Locator Pin Hole Glo-Bar Igniter Wire Mesh Burner 17