Ganz Security PT127N-XT Manual - Page 34

G Motion Setup MOTION SETUP MOTION LOCK OFF PWR UP ACTION ON AUTO FLIP ON JOG MAX SPEED 120/SEC JOG DIRECTION INVERSE FRZ IN PRESET OFF BACK EXIT OSD MENU 4 Sets the general functions of Pan/Tilt motions. z Motion Lock [ON/OFF] If Motion Lock is set to ON, it is impossible to set up and delete Preset, Swing, Pattern and Group. It is possible only to run those functions. To set up and delete those functions, enter into OSD menu. z Power Up [ON/OFF] Action Refer to ೤Other Functions" section. z Auto Flip [ON/OFF] Refer to ೤Other Functions" section. z Jog Max Speed [1q/sec ~360q/sec] Sets the maximum jog speed. Jog speed is inversely proportional to the zoom magnifications. As the zoom magnification goes up, the pan/tilt speed goes down. z Jog Direction [INVERSE/NORMAL] Sets the Jog Direction. If this is set to ೢInverseೣ, the view direction in the screen is same as the direction of joystick. If this is set to ೢNormalೣ, the view direction in the screen is the reverse dirction of joystick. z Freeze in Preset [ON/OFF] Sets Frame Freeze Function. This feature freezes the scene on the monitor when going to a preset. At the start point of a preset movement, a camera starts freezing the image of the start point. Camera keeps displaying the image of the start point during preset movement and does not display the images which camera gets during preset movement. As soon as camera stops at preset end point, camera starts displaying live images which it gets at the end preset point. This feature also reduces bandwidth when working with digital systems or digital network systems. This function availability should be different by models. GSpeed Dome Camera Instruction Manual 34/48