Fujitsu MPA3035AT Product Manual - Page 113
If this bit is 0, the attribute is outside the insurance range of the device when the, thresholds
![]() |
View all Fujitsu MPA3035AT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
• Attribute ID The attribute ID is defined as follows: Attribute ID Attribute name 0 (Indicates unused attribute data.) 1 Reserved 2 Reserved 3 Spindle motor activation time 4 Number of times the spindle motor is activated 5 Number of alternative sectors 7 Reserved 8 Reserved 9 Power-on time 10 Number of retries made to activate the spindle motor 12 Number of power-on-power-off times 13 to 199 (Reserved) 200 Write error rate 201 to 255 (Unique to vendor) • Status flag Bit 0: If this bit is 1, the attribute is within the insurance range of the device when the attribute exceeds the threshold. If this bit is 0, the attribute is outside the insurance range of the device when the exceeds the threshold. attribute Bits 1 to 15: Reserved bits • Current attribute value The current attribute value is the normalized raw attribute data. The value varies between 01h and 64h. The closer the value gets to 01h, the higher the possibility of a failure. The device compares the attribute values with thresholds. When the attribute values are larger than the thresholds, the device is operating normally. • Attribute value for the worst case so far This is the worst attribute value among the attribute values collected to date. This value indicates the state nearest to a failure so far. 5 - 52 C141-E034-02EN
![](/manual_guide/products/fujitsu-mpa3035at-product-manual-5fe5803/113.png)