Frigidaire FHTE103WA2 Complete Owners Guide - Page 14
Operating Instructions
View all Frigidaire FHTE103WA2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
14 OPERATING INSTRUCTIONS NOTE YOU WILL SEE: The following instructions are for the control panel. The same instructions can be used for the remote control. TO TURN UNIT ON: This mode is a fixed combination of Cool mode and Auto fan speed setting. In this mode, the fan speed can not be selected manually. COOL FEATURE: DO THIS: PRESS ON/OFF BUTTON YOU WILL SEE: DO THIS: PRESS MODE BUTTON CHOOSE COOL NOTE: The unit will run in Cool mode with Eco feature and Auto fan speed setting when used for the first time. With the Eco feature, when the room temperature is below the set temperature, the fan will continue to run for 3 minutes after the compressor shuts o . The fan then cycles on for 2 minutes at 10 minute intervals until the room temperature is above the set temperature, at which time the compressor turns back on. Eco feature can be activated or deactivated by pressing Eco button, but it is invalid in fan only mode. AUTO FEATURE: YOU WILL SEE: In this mode, the fan remains on all of the time with the compressor cycling on and o when the desired room temperature is reached. TO CHANGE TEMPERATURE SETTlNG: DO THIS: PRESS MODE BUTTON CHOOSE AUTO DO THIS: PRESS TO RAISE PRESS TO LOWER