Frigidaire FFET2726TB Complete Owner s Guide - Page 13

Setting the Clock The set clock control is used to set the clock. The clock may be set for 12 or 24 hour display operation. The clock is preset at the factory for 12 hour display. When the oven is first plugged in, or when the power supply to the oven has been interrupted, the time in the display will flash. To set the clock (example: setting time for 1:30): 1. Press Set Clock. CLO will appear in the display. 2. Press 1 3 0 on the numeric keypad to set the time of day to 1:30. CLO will stay in the display. 3. Press START. CLO will disappear and the clock will start. Temperature Display (Fahrenheit/Celsius) The oven control can be programmed to display temperatures in °F or °C. The oven is preset at the factory to display in °F. To change display from °F to °C or °C to °F 1. Press and hold Broil for about 6 seconds until F or C appears in the display. 2. Press Self Clean to switch between °F or °C display modes. 3. Press START to accept the change or press OFF to reject the change. Add 1 Minute The Add 1 Minute key adds one minute to the timer with each key press. This allows the timer to be changed to add more time without stopping to reset it. If the timer is not active and Add 1 Minute is pressed, the timer will turn on and begin counting down. To turn off the timer at any time press Timer On-Off. SETTING OVEN CONTROLS Setting the Timer The Timer On-Off key controls the minute timer and serves as an extra timer and can be used during any of the other oven control functions. To set the minute timer: 1. Press Timer On-Off. -- -- will appear and timer will flash in the display. Press the number keys to set the desired time. 2. Press START. The time will begin to count down and TIMER will stay in the display. When the time expires, End and TIMER will show in the display. The clock will beep three times every 30 seconds until Timer On-Off is pressed. 3. To cancel the minute timer before the set time expires, press Timer On-Off. NOTE If START is not pressed, the timer will return to the time of day after 25 seconds.The timer does not start or stop the cooking process. Setting 12 or 24 Hour Time of Day Display 1. Press and hold set clock for 6 seconds. CLO will appear in the display. 2. Continue holding the key until 12Hr dAY or 24Hr dAY appears in the display and the control beeps once. 3. Press Self Clean to switch between the 12 and 24 hour time of day display. The display will show either 12Hr dAY or 24Hr dAY. 4. Press START to accept the change or press OFF to reject the change. NOTE 12h indicates that the oven is set to 12 hour power saving mode. --h indicates that the oven is set to continuous cooking mode. 13