Foxconn H67S User manual - Page 20
Install an Expansion Card - manual
View all Foxconn H67S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
CAUTION 2 2-3 Install an Expansion Card ! ■ ��M��a�k�e��s�u�r�e��th�e��m��o�t�h�e�r�b�o�a��rd��s�u�p��p�o�r�ts��t�h�e��e�x�p�a�n��s�io�n��c�a�r�d�.��C�a�r�e�f�u�ll�y��re��a�d��th�e��m��a�n�u��a�l �t�h�a�t came with your expansion card. ■ ��A�l�w�a�y��s�t�u�r�n��o�f�f �t�h�e��c�o�m��p�u�t�e�r�a��n�d��u�n�p�l�u�g��th��e��p�o�w��e�r�c�o�r�d��f�ro��m��t�h�e��p�o�w��e�r��o�u�tl�e�t��b�e�fo��re� installing an expansion card to prevent hardware damage. PCI Express x16 Follow the steps below to correctly install your expansion card in the expansion slot. 1. Locate an expansion slot that supports your card. Remove the metal slot cover from the chassis back panel. 2. Align the card with the slot, and press down on the card until it is fully seated in the slot. 3. Make sure the metal contacts on the card are completely inserted into the slot. 4. Secure the card's metal bracket to the chassis back panel with a screw. 5. After installing all expansion cards, replace the chassis cover. 6. Turn on your computer. If necessary, go to BIOS Setup to make any required BIOS changes for your expansion card(s). 7. Install the driver provided with the expansion card in your operating system. Installing and Removing a PCI Express x16 Graphics Card : • Installing a Graphics Card: Gently insert the graphics card into the PCI Express x16 slot. Make sure the graphics card is locked by the latch at the end of the PCI Express x16 slot. • Removing the Card: Push the latch at the end of the PCI Express x16 slot to release the card and then pull the card straight up from the slot. 13