Foxconn A78AX 3.0 English Manual. - Page 39
USB Configuration
View all Foxconn A78AX 3.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
3 USB Configuration CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc. USB Configuration USB Configuration Help Item Module Version - 2.24.5-13.4 Enables support for legacy USB. USB Devices Enabled : Auto option disables None legacy support if no USB devices are Legacy USB Support [Enabled] connected. USB 2.0 Controller Mode [High Speed] Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help F9:Optimized Defaults ► Legacy USB Support This item is used to enable the support for USB devices on legacy OS. If you have a USB keyboard or mouse, set to auto or enabled. ► USB 2.0 Controller Mode This item is used to set the transmission rate mode of USB 2.0. The available settings are : [High Speed] in 480Mbps; [Full Speed] in 12Mbps. If USB devices are connected to the computer, the following item will appear : ► USB Storage Configuration After pressing , you can set the reset delay for the USB mass storage device. There are many different emulation types of this USB device, such as floppy, hard disk and CDROM can be selected. 32