Fellowes 130C Manual - Page 3

CAPABILITIES 200C SHRED THROUGH AUTO FEED TRAY 200C SHRED THROUGH MANUAL FEED SLOT 8-1/2" x 11" paper Staples Paper clips 8-1/2" x 14" paper Credit cards CD/DVD Up to 20 Sheets Stapled - Pull apart stapled stacks of paper containing more than 20 sheets Up to 20 Sheets Clipped - Pull apart clipped stacks of paper containing more than 20 sheets 130C SHRED THROUGH AUTO FEED TRAY Junk mail Folded paper 130C SHRED THROUGH MANUAL FEED SLOT 8-1/2" x 11" paper Staples Paper clips 8-1/2" x 14" paper Credit cards Folded paper Up to 20 Sheets Stapled - Pull apart stapled stacks of paper containing more than 20 sheets Up to 20 Sheets Clipped - Pull apart clipped stacks of paper containing more than 20 sheets Will not shred: Adhesive labels, continuous form paper, folded paper (Autofeed), bound documents, magazines, transparencies, newspaper, cardboard, binder clips, industrial staples, large paper clips, more than 20 pages stapled or paper clipped together, staples in top center of paper, laminates, 3½ in. Floppies, file folders, X-rays or plastic other than noted above Paper shred size: Cross-Cut (200C 5/32 in. x 1-1/2 in. (4mm x 38mm) Cross-Cut (130C 5/32 in. x 2 in. (4mm x 50mm) Maximum: Auto Feed Sheet Capacity (200C 200* Auto Feed Sheet Capacity (130C 130* Manual Feed Sheet Capacity (200C 10* Manual Feed Sheet Capacity (130C 8* *8.5 in. x11 in., 20lb., (75g) paper at 120V, 50/60 Hz, 4.0Amps (200C), 4.0Amps (130C); heavier paper, humidity or other than rated voltage may reduce capacity. BASIC SHREDDING OPERATION AUTO FEED 1 * Do not open lid once shred cycle has started. 2 3 4 200C Continuous operation: 12-minute maximum NOTE: Shredder runs briefly after each pass to clear entry. Continuous operation beyond 12-minutes will trigger 25-minute cool down period. 130C Continuous operation: 10-minute maximum NOTE: Shredder runs briefly after each pass to clear entry. Continuous operation beyond 10-minutes will trigger 25-minute cool down period. Plug in and put disconnect power switch in ON (I) position MANUAL FEED 1 Open lid 2 Add paper. Paper should be flat and aligned with front of paper tray. Close lid and press start ( ) to begin shredding 3 or Plug in and put Feed paper straight into disconnect power paper entry and release switch in ON (I) position Hold CD (200C only)/Card at edge, feed straight into paper entry and release Note: Manual feed cannot be used while Auto Feed in use. 3