Epson WorkForce WF-7210 Users Guide - Page 139
Print Head Cleaning, Cleaning the Print Head Using the Product Control Panel, Start, Caution, Finish
![]() |
View all Epson WorkForce WF-7210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
4. Select the cleaning cycle you want to run, based on the nozzle check pattern. 5. Click Start to begin the cleaning cycle. The power light flashes throughout the cleaning cycle and stays on when the cleaning cycle is finished. Caution: Never turn off the product during a cleaning cycle or you may damage it. 6. Check the printed pattern to see if there are gaps in the lines. Print head is clean Print head needs cleaning • If there are no gaps, click Finish. • If there are gaps or the pattern is faint, click Clean to clean the print head again. If you don't see any improvement after cleaning the print head up to 4 times, wait at least 6 hours without printing or longer if printing. Then try cleaning the print head again. If quality still does not improve, one of the ink cartridges may be old or damaged and needs to be replaced. Parent topic: Print Head Cleaning Related tasks Cleaning the Print Head Using the Product Control Panel 139
![](/manual_guide/products/epson-workforce-wf7210-users-guide-2b3795a/139.png)