Epson V11H303020 User's Guide - Page 59
starts as soon as you plug in the power cord. You don't have, to press
UPC - 010343868175
View all Epson V11H303020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
■ User's Logo Turn on to display the image or logo you have captured whenever the projector is turned on. See page 64 for more information. ■ Projection Front: Projector is in front of the screen. Front/Ceiling: Projector is in front of the screen, mounted upside-down from the ceiling. Rear: Projector is behind the screen. Rear/Ceiling: Projector is behind the screen, mounted upside-down from the ceiling. To change from Front to Front/Ceiling or Rear to Rear/Ceiling, press and hold the A/V Mute button on the remote control for five seconds. ■ Operation Direct Power On: When this feature is enabled, projection starts as soon as you plug in the power cord. You don't have to press the P Power button. Sleep Mode: When enabled, the projector turns off the lamp if it has not received any input signals for a period of time (as defined in the Sleep Mode Time setting). Sleep Mode Time: When Sleep Mode is on, you can set the period of time before the projector turns off automatically, from 1 to 30 minutes. Lens Cover Timer: This feature is enabled by default to turn the power off automatically when the A/V Mute slide is closed for more than 30 minutes. High Altitude Mode: When using the projector at an altitude above 4,921 feet (1,500 meters), turn this setting on to ensure that the internal temperature of the projector is regulated properly. Turn this setting off for lower elevations. note Logo settings cannot be changed if the User's Logo Protect feature has been turned on. See page 65. note When Direct Power On is turned on, press the P Power button to turn the projector off, wait until the P Power light turns a steady orange, then unplug the power cord. Fine-tuning the Projector 59