Epson V11H068920 User Manual - Page 95
caution, Gently insert the new lamp.
View all Epson V11H068920 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
5. Loosen the lamp cover screws (you don't need to take them out all the way). Then remove the cover. 6. Loosen the three screws holding the lamp in place (you can't remove them). 7. Grasp the wire handle as shown and pull the lamp straight out. caution Avoid touching the glass portion of the new lamp. Oils transferred from your hands can cause the lamp to overheat and fail prematurely. 1 2 8. Gently insert the new lamp. 9. Once the lamp is fully inserted, tighten its screws and replace the cover. (The projector won't come on if the lamp cover is loose.) 10. Reset the lamp timer as described in the next section. note The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash. When you get a replacement lamp for your projector, new air filters are included. This is a good time to install them (see page 92). Maintaining the Projector 95