Epson TM-U220 Users Manual - Page 7

STD Serial (DIP Switch 1) SW Function 1 Data receive error 2 Receive buffer capacity 3 Handshaking 4 Word length 5 Parity check 6 Parity selection 7 Transmission speed BUSY condition 8 Serial (DIP Switch 2) SW Function 1 Print column 2 For internal use only (autocutter) 3 Undefined 4 Serial interface selection 5 Undefined 6 For internal use only (flash memory rewriting) 7 Pin 6 reset signal 8 Pin 25 reset signal On Ignored 40 bytes XON/XOFF 7 bits Yes Even 4800 bps Receive buffer full Off Prints "?" 4 KB DTR/DSR 8 bits No Odd 9600 bps Receive buffer full or Offline On 42/35 Enabled Off 40/33 Disabled - - Memory switch DIP switch - - Enabled Disabled Parallel (DIP Switch 1) SW Function 1 Auto line feed 2 Receive buffer capacity 3~7 Undefined 8 BUSY condition On Off Enabled Disabled 40 bytes 4 KB - - Receive buffer Receive full buffer full or Offline Parallel (DIP Switch 2) SW Function 1 Print column selection 2 For internal use only (autocutter) 3~5 Undefined 6 For internal use only (flash memory rewriting) 7 Undefined 8 Pin 31 reset signal On 42/35 Enabled Enabled Used Off 40/33 Disabled Disabled Not used Used Used Not used Not used Features of Printer Types See illustration A. Autocutter Take up device Paper width (mm) Type A Yes Yes 76 Type B Yes No 76/69.5/57.5 Type D No No 76/69.5/57.5 vii