Epson TM-U220 Users Manual - Page 6
DIP Switch Tables
View all Epson TM-U220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Indication of the manufacturer and the importer in accordance with requirements of directive 2011/65/ EU (RoHS) Manufacturer: SEIKO EPSON CORPORATION Address: 3-5, Owa 3-chome, Suwa-shi, Nagano- ken 392-8502, Japan Web site: www.epson.com/ Importer: Address: Web site: EPSON EUROPE B.V. Atlas Arena, Asia Building, Hoogoorddreef 5,1101 BA Amsterdam Zuidoost The Netherlands www.epson.eu/ Türkiye'deki kullanıcılar için AEEE Yönetmeliğine Uygundur. DIP Switch Tables Look at the numbers and letters in the area indicated in the illustration. If the last letters are "US", use the "US" tables below. If the last letters are "STD", use the "STD" tables. CAUTION: Be sure to replace the DIP switch cover before using the printer. US Serial (DIP Switch 1) SW Function 1 Data receive error 2 Receive buffer capacity 3 Handshaking 4 Word length 5 Parity check 6 Parity selection 7 Transmission speed BUSY condition 8 Serial (DIP Switch 2) SW Function 1 Print column 2 For internal use only (autocutter) 3 Pin 6 reset signal 4 Pin 25 reset signal 5 Undefined 6 For internal use only (flash memory rewriting) 7 Undefined 8 Serial interface selection On Ignored 40 bytes XON/XOFF 7 bits Yes Even 4800 bps Receive buffer full Off Prints "?" 4 KB DTR/DSR 8 bits No Odd 9600 bps Receive buffer full or Offline On 42/35 Enabled Used Used Enabled Off 40/33 Disabled Not used Not used Disabled Parallel (DIP Switch 1) SW Function 1 Auto line feed 2 Receive buffer capacity 3~7 Undefined 8 BUSY condition On Enabled 40 bytes Receive buffer full Off Disabled 4 KB Receive buffer full or Offline Parallel (DIP Switch 2) SW Function 1 Print column selection 2 For internal use only (autocutter) 3 Undefined 4 Pin 31 reset signal 5 Undefined 6 For internal use only (flash memory rewriting) 7 Undefined 8 Undefined On 42/35 Enabled Used Enabled - Off 40/33 Disabled Not used Disabled - - Memory switch DIP switch vi