Epson TM-T88V Technical Reference Guide - Page 60
Connecting the built-in USB interface cable, Y connection only with the UB-U01III/U02III
View all Epson TM-T88V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Y connection (only with the UB-U01III/U02III) This printer is connected to the host computer via the USB port. When a customer display (DM-D) is to be connected, connect it to the printer via the modular cable. Make sure to pull out the power cable before connecting cables. When connecting a customer display to the printer, connect the modular jack from the customer display to the DM connector. Set the communication conditions of the customer display as follows: Baud rate: 19200 bps Bit length: 8-bit Parity: no parity Stop bit: 1 DM-D Modular cable USB cable Modular cable TM-T88V Cash drawer Connecting the built-in USB interface cable 1 Put the USB cable on the hook as shown in the figure, then connect it firmly to the built-in USB interface connector. 2 Connect the other connector of the cable to the host computer. Built-in USB interfaceconnector USB cable Hook 60