Epson TM-T88IV UB-R04 Technical Reference Guide - Page 33
Connection from the Setting Computer, Setting of the UB-R04
View all Epson TM-T88IV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Chapter 2 Installation Connection from the Setting Computer Connect the setting computer to the access point by the wired LAN. The setting of the access point is set for the Dynamic Status Sheet. The setting items are as follows. As for the setting method of the setting computer, refer to the manual of the computer used. • SSID (Ex: EpsonNet) • IP Address (Ex: 192.168.192.2) (Don't set the same address as the IP Address of the printer to the setting computer and the access point. Example: If the IP Address is 192.168.192.168, the IP Address of the setting computer should be set to another number, such as 192.168.192.2. The same address (192.168.192.168) cannot be used.) • Channel (Ex: 11 ch) • Security setting (Ex: WPA2-PSK) • Passphrase (Ex: EpsonNet) 2 When you set up more than one TM printers equipped with wireless LAN interface, turn on only one printer. If more than one printer is turned on at the same time, the TM printer cannot be set up. At this stage, the TM printer can communicate with the setting computer. Setting of the UB-R04 Set up the UB-R04 according to the following steps. 1 Start up the EpsonNet Config of the setting computer. 33