Epson TM-T20II Important Safety Information - Page 10

English Important Safety Information This section presents important information intended to ensure safe and effective use of this product. Read this section carefully and store it in an accessible location. Safety Precautions WARNING: WARNINGS MUST BE FOLLOWED CAREFULLY TO AVOID SERIOUS BODILY INJURY. ❏ Shut down your equipment immediately if it produces smoke, a strange odor, or unusual noise. Continued use may lead to fire or shock. Immediately unplug the equipment and contact your dealer or a Seiko Epson service center for advice. ❏ Never attempt to repair this product yourself. Improper repair work can be dangerous. ❏ Never disassemble or modify this product. Tampering with this product may result in injury, fire, or shock. ❏ Be sure to use the specified power source. Connection to an improper power source may cause fire. ❏ Never insert or disconnect the power plug with wet hands. Doing so may result in severe shock. ❏ Do not place multiple loads on the power outlet (wall outlet). Always supply power directly from a standard power outlet. Overloading the outlet may lead to fire. ❏ Be sure your power cord meets the relevant safety standards and includes a power-system ground terminal (PE terminal). Otherwise shock may result. ❏ Handle the cables with care. Improper handling may lead to fire or shock. • Do not use the cables if it they are damaged. • Do not modify or attempt to repair the cables. • Do not place any object on top of the cables. • Avoid excessive bending, twisting, and pulling of the cables. • Do not place cables near heating equipment. • Check that the plug is clean before plugging it in. • Check that the AC inlet is clean before plugging the power connector in it. • Be sure to push the prongs and power connector all the way in. ❏ Never glue the AC inlet and the power cable together. ❏ Regularly remove the power plug from the outlet and clean the base of the prongs and between the prongs. If you leave the power plug in the outlet for a long time, dust may collect on the base of the prongs, causing a short and fire. ❏ Regularly confirm that the plug and AC inlet are not wet with liquid such as water. ❏ Do not allow foreign matter to fall into the equipment. Penetration by foreign objects may lead to fire. ❏ If water or other liquid spills into this equipment, unplug the power cord immediately, and then contact your dealer or a Seiko Epson service center for advice. Continued usage may lead to fire. ❏ Do not use aerosol sprayers containing flammable gas inside or around this product. Doing so may cause fire. ❏ Do not connect a telephone line to the drawer kick-out connector; otherwise the printer and the telephone line may be damaged. 10