Epson SureLab D3000 Operation Guide - Page 11
Inside cover for long paper ejection unit upper/lower, Exhaust vent, Trimmed waste paper box
View all Epson SureLab D3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Introduction F Inside cover for long paper ejection unit (upper/lower) Open if there is a paper jam. Loosen the screw for the upper cover section, and then remove. G Exhaust vent Vents internal heat from the printer. Do not cover the vent. H Trimmed waste paper box Collects trimmed waste paper during printing. U "Disposing of Trimmed Waste Paper" on page 72 I Humidity control unit power switch The humidity control unit operates when you press the switch to turn on the light. U "Adjusting the Humidity in the Roll Paper Feeder" on page 80 J Power switch Under normal use, the switch is turned on (the light is on). During an emergency, or when the printer is not used for a long time, press to switch the power off (the light turns off). Normally, you should turn the printer on or off from the Client PC. K AC inlet Connects the power cable. 11