Epson Pro L1505UH Users Guide - Page 48
Removing a Lens, Extended, Parent topic, Related tasks, Caution, Lens Shift
View all Epson Pro L1505UH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
6. Replace the lens cover. 7. If prompted, select Yes to calibrate the lens. Note: Lens calibration helps the projector to correctly acquire the lens position and adjustment range, and can take up to 100 seconds to complete. When calibration is finished, the lens returns to the same position it was in before calibration. (ELPX02 returns to the standard position.) 8. When using one of the following lenses, select the lens type in the Extended menu: ELPLS04, ELPLU02, ELPLR04, ELPLW04, ELPLM06, ELPLM07, or ELPLL07. Parent topic: Attaching and Removing a Lens Related tasks Setting the Lens Type Removing a Lens You can remove a lens to replace it with a different lens. Caution: Remove the lens only when necessary and make sure the front of the projector is not facing up when you remove the lens. This prevents dirt or dust from entering the projector and lowering the projection quality. Avoid touching the lens with your bare hands to prevent fingerprints on or damage to the lens surface. 1. Center the lens using the Lens Shift (remote control) or Lens (control panel) button. 2. Turn off the projector and unplug the power cord. 48