Epson Pro L1070W Users Guide - Page 37
Connecting to a Component Video Source, to your component video cable.
View all Epson Pro L1070W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
2. Connect the BNC connectors to the projector's R/Cr/Pr, G/Y, B/Cb/Pb ports. 3. Connect an audio cable, if necessary. Parent topic: Connecting to Video Sources Connecting to a Component Video Source If your video source has component video ports, you can connect it to the projector using an optional component-to-VGA video cable. Depending on your component ports, you may need to use an adapter cable along with a component video cable. 1. Connect the component connectors to your video source's color-coded component video output ports, usually labeled Y, Pb, Pr or Y, Cb, Cr. If you are using an adapter, connect these connectors to your component video cable. 2. Connect the VGA connector to the Computer port on the projector. 3. Tighten the screws on the VGA connector. 37