Epson Pro L1070W Users Guide - Page 278
Solutions When \, Displaying From a PC Laptop
View all Epson Pro L1070W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 278 highlights
Related references Input Signal Settings - Signal Menu Projector Setup Settings - Extended Menu Related tasks Adjusting the Brightness Unlocking the Projector's Buttons Solutions When "No Signal" Message Appears If the "No Signal" message appears, try the following solutions: • Press the Source Search or Search button and wait a few seconds for an image to appear. • Turn on the connected computer or video source, and press its play button to begin your presentation, if necessary. • Check the connection from the projector to your video sources. • If you are projecting from a laptop computer, make sure it is set up to display on an external monitor. • If necessary, turn the projector and the connected computer or video source off and then on again. • Try a different video cable. • If the other solutions do not solve the problem, reset all of the projector settings using the options on the Reset menu. Displaying From a PC Laptop Displaying From a Mac Laptop Parent topic: Solving Image or Sound Problems Related concepts Projector Connections Displaying From a PC Laptop If you see the "No Signal" message when you display from a PC laptop, you need to set up the laptop to display on an external monitor. 1. Hold down the laptop's Fn key and press the key labeled with a monitor icon or CRT/LCD. (See your laptop manual for details.) Wait a few seconds for an image to appear. To display on both the laptop's monitor and the projector, try pressing the same keys again. Note: On Windows 7 or later, hold down the Windows key and press P at the same time, then click Duplicate. 278