Epson Pro L1060W Users Guide - Page 240
A/V Output, A/V Settings
View all Epson Pro L1060W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 240 highlights
Setting A/V Settings Standby Mode Options A/V Output Monitor Out Audio Settings Communication On Communication Off 240 Description Selects various audio and video output settings A/V Output: select to output audio and video to an external device when the projector is in standby mode (Standby Mode must be turned on to use this setting) Monitor Out: select the image source to output to an external device when the projector is in standby mode; when set to Auto, selects output from the Computer or BNC port depending on which was used when the projector went into standby mode Audio Settings: selects the audio source to output to an external device Enable this setting to allow the following operations to occur when the projector is in standby mode: • Monitor and control the projector over a network • Output audio and video to an external device (A/V Output must be set to Always On) • Communication from the HDBaseT port (Control Communications must be set to On)