Epson ColorWorks C3500 Technical Reference Guide - Page 226
ensure margins of 1.5 mm {0.06} or more in the print data., Even if Borderless Printing is enabled
View all Epson ColorWorks C3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 226 highlights
When "Borderless Printing" is enabled Top, bottom, left, right margins: 0 mm (Typical value) Center of paper width Perforated line Auto-cut position Paper width 0.5 to 1.0 mm 1.5 mm Paper feeding direction 15.0 mm or more*1 18.0 mm or more*2 Auto-cut position 1.5 mm 1.5 mm Auto-cut position *1 When auto cut is not performed: 8.0 mm or more *2 When auto cut is not performed: 11.0 mm or more Edge cutoff 2.0 mm Print area width Edge cutoff 2.0 mm Print area Label area Backing paper Black mark position If you enabled "Borderless Printing", printing is done with settings for no margins, but the printing might protrude beyond the paper/label, depending on the actual print position and the set position for the paper/label. To make sure printing does not protrude out, ensure margins of 1.5 mm {0.06"} or more in the print data. Even if "Borderless Printing" is enabled, the maximum value for the print area width is 104 mm {4.09"}. 226