Electrolux EI30GF35JS Complete Owner's Guide (English) - Page 9
Before setting surface, burners
View all Electrolux EI30GF35JS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Surface Cooking 9 Before setting surface burners (con't) On round style burners, the burner cap lip (Figure 1,) should fit snug into the center of burner head and rest level. Refer to Figures 2 and 3 for correct and incorrect burner cap placement. Once in place, you may check the fit by gently sliding the burner cap from side to side (Figure 4) to be sure it is centered and firmly seated. When the burner cap lip makes contact inside the center of the burner head you will be able to hear the burner cap click. Please note that the burner cap should NOT move off the center of the burner head when sliding from side to side. Check and be sure that all oval style burner caps are correctly in place on oval burner heads. Installing burner grates Make sure the burner grates are properly placed on the cooktop before using the surface burners. The grates are designed to rest inside the recess on the cooktop. To install burner grates, place grates flat-side down and align into the cooktop recess. Grates should rest flush against each other and against the sides of the recess (see Figure 5). Correct burner cap placement Fig. 2 Incorrect burner cap placement Fig. 3 Fig. 4 burner cap burner cap lid burner head Fig. 1 Fig. 5