Electrolux ECCG3672AS Complete Owners Guide English - Page 11

Cooking with the gas cooktop WARNING The burning of gas cooking fuel can create small amounts of carbon monoxide, benzene, formaldehyde and soot. To minimize exposure to these substances, the burners should be adjusted by a certified installer or authorized servicer to ensure proper combustion. Ensure proper ventilation with an open window or use a ventilation fan or hood when cooking with gas. Always operate the unit according to the instructions in this manual. Preliminary information • Remove all packaging materials and literature from the cooktop surface. • Wipe with a clean, damp sponge and dry. • There may be a slight odor during the first few uses. This is normal and will disappear. • Optimum cooking results depend on the proper cookware being selected and used. • The cooktop uses electronic igniters to light the burners. There is no pilot light. Each burner has its own igniter. All igniters are activated when a control knob is pushed. • You can light and adjust the flame size of each burner by pressing and then turning the relative cooktop knobs. • Read all the safety precautions and Use and Care Manual information before using the appliance. CAUTION • Do not force the knobs to turn if you have not pressed them before. • To avoid possible injury or damage to the appliance, ensure that the grates are installed exactly as indicated in the installation instructions and not backwards or upside down. USING THE COOKTOP Correct burners placement 11 The cooktop is equipped with two differently coated burners and they must to be positioned in their correct housings: 1. Brass coated burners - to be placed in the front left and front right zones. 2. Black coated burners - to be placed in all the other zones. Refer to the following diagram to know how the knobs are connected to the burners: