Dynex DX-22LD150A11 User Manual (English) - Page 19

Adjusting the sound DX-19LD150A11/DX-22LD150A11 15 Adjusting the computer image To adjust the computer image: 1 Make sure that your TV/DVD combo is in VGA mode. For more information, see "Selecting the video input source"on page 12. 2 Press MENU. The on-screen menu opens with the Picture menu displayed. Changing the PC video resolution To change the PC video resolution: 1 Click Start, Control Panel, then double-click Display. The Display Properties dialog box opens. 3 Press or to highlight Settings, then press . The Settings menu opens. 4 Press or to highlight VGA Settings, then press ENTER or . The VGA Settings submenu opens. 2 Click the Settings tab. 3 Change the screen resolution setting to a supported resolution. The ideal resolution for your TV/DVD combo is 1360×768. Click OK, then click Yes to save your changes. PC signal input chart The following table shows the suggested screen resolutions. Format Resolution VGA 640x480 720x400 SVGA 800x600 800x600 XGA 1024x768 Frequency (Hz) 60 70 60 72 60 WXGA 1280x768 60 1360x768 60 If "Unsupported Signal" appears on the screen, adjust the PC display setting to correspond to one of the settings in the preceding table. Adjusting the sound 5 Press or to highlight an option, then press or to adjust the option. You can adjust: • Auto Adjust-Automatically adjusts the image settings such as position and phase. • H-Position-Moves the image right or left • V-Position-Moves the image up or down • Clock-Adjusts the sample frequency • Phase-Adjusts the focus to stabilize the image 6 Press MENU to close the on-screen menu. Selecting the audio language You can choose from one of the four preset equalizer (EQ) modes. To choose an audio language with the remote control: • Using the remote control, press SAP repeatedly to cycle through the audio stream options. The options available depend on your TV provider. • In analog TV mode, select one of the following options. • Mono-Select this option if there is noise or static from a weak broadcast signal. • Stereo-Select this option for programs broadcast in stereo sound. • SAP-Select this option to enable audio in an alternative language. • In digital TV mode, select the preferred audio track language (when available).