Denon S-101 Owners Manual - Eng/Span - Page 24

Cursor, Enter, Rep 1/all - protection mode

Page 24 highlights

ENGLISH Basic Operation 2 8, 9 1/ 3 1 2 NUMBER ENTER DISPLAY 3 8, 9 CURSOR ENTER REP 1/ALL 8, 9 CURSOR 2 To set the repeat mode 2 To return to the initial disc information screen 1 Press the 2 button. 2 Press the CURSOR • button to select "ROOT" at the upper right of the screen, then press the ENTER button. • Programmed playback is not possible with MP3/WMA discs. • The S-101 is compatible with the "MPEG-1 Audio Layer 3" standards (sampling frequency of 32, 44.1 or 48 kHz). It is not compatible with such other standards as "MPEG-2 Audio Layer 3", "MPEG-2.5 Audio Layer 3", MP1, MP2, etc. WMA files recorded with a sampling frequency (fs) of 32, 44.1, and 48 kHz are supported. • It may not be possible to play some CD-R/CD-RW discs due to disc properties, dirt, warping, etc. • In general, the higher an MP3 file's bit rate, the better the sound quality. On the S-101, we recommend using MP3 files recorded with bit rates of 128 kbps or greater. • Applicable bit rates: 32 to 320 kbps for MP3 files, 64 k to 160 kbps for WMA files. • The digital signals output when playing MP3 files are MP3 signals converted into PCM, regardless of whether the audio output presenting is set to "normal" or "PCM conversion". The signals are output with the same sampling frequency as that of the music source. • MP3/WMA files may not be played in the expected order, since the writing software may change the position of the folders and the order of the files when writing them on the CD-R/CD-RW. • When writing MP3/WMA files on CD-R/CD-RW discs, select "ISO9660 level 1" as the writing software format. This may not be possible with some types of writing software. For details, refer to the writing software's usage instructions. • With the S-101 it is possible to display folder names and file names on the screen like titles. The S-101 can display up to 63 characters, consisting of numbers, capital letters, small letters and the "_" (underscore) mark. Basic Operation • If recorded in a format other than "ISO9660 level 1", normal display and playback may not be possible. In addition, folder and file names including other symbols will not be displayed properly. • Be sure to add the extension ".MP3/WMA" to MP3/WMA files. Files cannot be played if they have any extension other than ".MP3/WMA" or if they have no extension. (with Macintosh computers, MP3/WMA files can be played by adding the extension ".MP3/WMA" after the file name consisting of up to 63 capital letters, small letters or numbers and recording the files on the CD-R/CD-RW.) • Do not apply stickers, tape, etc., to either the label side or the signal side of CD-R/CD-RW discs. If adhesive gets on the surface of a disc, the disc may get stuck inside the S-101 and be impossible to eject. • Copyright protected WMA files cannot be played. Also note that depending on the writing software and conditions, playback might not be possible, or the files might not be displayed properly. • While in the stop condition, the DISPLAY button of the remote control can be used to switch and display the title names and the artist names. (One folder has a capacity of up to 99 files.) • Recorded discs with no more than 99 files per folder are recommended. Multiple folder configurations are possible; however, depending on the configuration, playback of all the folders and files might not be possible. • Multi-session discs and CD-R/CD-RW that have not been finalized can also be played back; however, playback of discs that have had session closure within 10 sessions or have been finalized is recommended. • Direct track selection using the NUMBER button on the remote control unit can specify up to 999 tracks (999 files) per folder. • When 999 tracks are exceeded, while the unit is stopped press the CURSOR buttons at the disc information screen to select the files, and press the 1 button of the ENTER button to play. • The MP3 ID3-Tag (Ver. 1, Ver. 2) function is compatible with title and artist names. • The WMA meta tag function is compatible with title, artist and album names. • The S-101 is not compatible with packet write software. • The S-101 is not compatible with play lists. • The S-101 is not compatible with MP3 PRO. The repeat mode changes each time the REP 1/ALL button is pressed. FOLDER TRACK REPEAT FOLDER REPEAT 21 ENGLISH

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138

21
ENGLISH
Basic Operation
Basic Operation
ENGLISH
• Programmed playback is not possible with MP3/WMA discs.
• The S-101 is compatible with the “MPEG-1 Audio Layer 3”
standards (sampling frequency of 32, 44.1 or 48 kHz). It is not
compatible with such other standards as “MPEG-2 Audio Layer
3”, “MPEG-2.5 Audio Layer 3”, MP1, MP2, etc. WMA files
recorded with a sampling frequency (fs) of 32, 44.1, and 48 kHz
are supported.
• It may not be possible to play some CD-R/CD-RW discs due to
disc properties, dirt, warping, etc.
• In general, the higher an MP3 file’s bit rate, the better the
sound quality. On the S-101, we recommend using MP3 files
recorded with bit rates of 128 kbps or greater.
• Applicable bit rates: 32 to 320 kbps for MP3 files, 64 k to 160
kbps for WMA files.
• The digital signals output when playing MP3 files are MP3
signals converted into PCM, regardless of whether the audio
output presenting is set to “normal” or “PCM conversion”. The
signals are output with the same sampling frequency as that of
the music source.
• MP3/WMA files may not be played in the expected order, since
the writing software may change the position of the folders and
the order of the files when writing them on the CD-R/CD-RW.
• When writing MP3/WMA files on CD-R/CD-RW discs, select
“ISO9660 level 1” as the writing software format. This may not
be possible with some types of writing software. For details,
refer to the writing software’s usage instructions.
• With the S-101 it is possible to display folder names and file
names on the screen like titles. The S-101 can display up to 63
characters, consisting of numbers, capital letters, small letters
and the “_” (underscore) mark.
2
To return to the initial disc information screen
1
Press the
2
button.
2
Press the
CURSOR
button to select “ROOT”
at the upper right of the screen, then press the
ENTER
button.
• If recorded in a format other than “ISO9660 level 1”, normal
display and playback may not be possible. In addition, folder
and file names including other symbols will not be displayed
properly.
• Be sure to add the extension “.MP3/WMA” to MP3/WMA files.
Files cannot be played if they have any extension other than
“.MP3/WMA” or if they have no extension. (with Macintosh
computers, MP3/WMA files can be played by adding the
extension “.MP3/WMA” after the file name consisting of up to
63 capital letters, small letters or numbers and recording the
files on the CD-R/CD-RW.)
• Do not apply stickers, tape, etc., to either the label side or the
signal side of CD-R/CD-RW discs. If adhesive gets on the
surface of a disc, the disc may get stuck inside the S-101 and
be impossible to eject.
• Copyright protected WMA files cannot be played. Also note
that depending on the writing software and conditions,
playback might not be possible, or the files might not be
displayed properly.
• While in the stop condition, the
DISPLAY
button of the remote
control can be used to switch and display the title names and
the artist names. (One folder has a capacity of up to 99 files.)
• Recorded discs with no more than 99 files per folder are
recommended. Multiple folder configurations are possible;
however, depending on the configuration, playback of all the
folders and files might not be possible.
• Multi-session discs and CD-R/CD-RW that have not been
finalized can also be played back; however, playback of discs
that have had session closure within 10 sessions or have been
finalized is recommended.
• Direct track selection using the
NUMBER
button on the remote
control unit can specify up to 999 tracks (999 files) per folder.
• When 999 tracks are exceeded, while the unit is stopped press
the
CURSOR
buttons at the disc information screen to select the
files, and press the
1
button of the
ENTER
button to play.
•The MP3 ID3-Tag (Ver. 1, Ver. 2) function is compatible with title
and artist names.
• The WMA meta tag function is compatible with title, artist and
album names.
• The S-101 is not compatible with packet write software.
• The S-101 is not compatible with play lists.
• The S-101 is not compatible with MP3 PRO.
2
To set the repeat mode
The repeat mode changes each time the
REP 1/ALL
button is pressed.
TRACK REPEAT
FOLDER
FOLDER REPEAT
1
/
3
2
8
,
9
CURSOR
REP 1/ALL
8
,
9
ENTER
NUMBER
DISPLAY
8
,
9
3
CURSOR
ENTER
1
2