Dell SE2419HR Monitor Users Guide - Page 48
Built-in Diagnostics, NOTE: You can run the built-in diagnostics only when the video
View all Dell SE2419HR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Built-in diagnostics Your monitor has a built-in diagnostic tool that helps you determine if any screen abnormality you experience is an inherent problem with your monitor, or with your computer and video card. NOTE: You can run the built-in diagnostics only when the video cable is unplugged and the monitor is in self-test mode. 1 Label Description 1 Button 1 To run the built-in diagnostics: 1. Ensure that the screen is clean (no dust particles on the surface of the screen). 2. Unplug the video cable(s) from the back of the computer or monitor. The monitor then goes into the self-test mode. 3. Press and hold Button 1 for 5 seconds. A gray screen appears. 4. Carefully inspect the screen for abnormalities. 5. Press Button 1 on the bottom of the monitor again. The color of the screen changes to red. 6. Inspect the display for any abnormalities. 7. Repeat steps 5 and 6 to inspect the display in green, blue, black, white and text screens. 48 | Troubleshooting