Dell P2425HE Monitor Simplified Service Manual - Page 17
Assemble USB board with Middle, Insert USB board FFC to USB board
View all Dell P2425HE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
S13 Attach a gasket on "USB board" (see red mark) Attach a gasket on "USB Shielding" (see pink mark) S15 Insert "Backlight wire" to "Panel" and "LED Drive board" Attach 2 tapes to fix "Backlight wire" on "Panel" S14 Assemble "USB board" with "Middle Frame" Lock 1 screw to fix "USB board" on "Middle Frame" Insert "USB board FFC" to "USB board" and "Interface board" Attach a black tape to fix "USB board FFC" on "Panel" S16 Insert "Control board FFC" to "Control board" S17 Assemble "Control board" to "Rear Cover" Lock 3 screws to fix "Control board" on "Rear Cover" (Screw Torque: 4.5±0.5 kgf) - 17 - (Screw Torque: 1.6-1.8 kgf)
- 17 -
S13
Attach a gasket on “USB board” (see
red mark)
Attach a gasket on “USB Shielding”
(see pink mark)
S14
Assemble “USB board” with “Middle
Frame”
Lock 1 screw to fix “USB board” on
“Middle Frame”
Insert “USB board FFC” to “USB board”
and “Interface board”
Attach a black tape to fix “USB board
FFC” on “Panel”
(Screw Torque: 4.5±0.5 kgf)
S15
Insert “Backlight wire” to “Panel” and
“LED Drive board”
Attach 2 tapes to fix “Backlight wire” on
“Panel”
S16
Insert “Control board FFC” to “Control
board”
S17
Assemble “Control board” to “Rear
Cover”
Lock 3 screws to fix “Control board” on
“Rear Cover”
(Screw Torque: 1.6-1.8 kgf)