Dell OptiPlex 5055 A-Series OptiPlex 5055 Small Form Factor Owners Manual - Page 34
Installing power switch
View all Dell OptiPlex 5055 A-Series manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
a cover b front bezel c 2.5 inch hard drive assembly d cooling shroud e optical drive 3 To release the power switch: a Disconnect the power switch cable from the system board [1]. b Press the power switch retention tabs and pull out from the computer [2, 3]. Installing power switch 1 Slide the power switch module into the slot on the chassis until it clicks into place. 2 Connect the power switch cable to the connector on the system board. 3 Install the: a optical drive b cooling shroud c 2.5 inch hard drive assembly d front bezel 34 Disassembly and reassembly
a
cover
b
front bezel
c
2.5 inch hard drive assembly
d
cooling shroud
e
optical drive
3
To release the power switch:
a
Disconnect the power switch cable from the system board [1].
b
Press the power switch retention tabs and pull out from the computer [2, 3].
Installing power switch
1
Slide the power switch module into the slot on the chassis until it clicks into place.
2
Connect the power switch cable to the connector on the system board.
3
Install the:
a
optical drive
b
cooling shroud
c
2.5 inch hard drive assembly
d
front bezel
34
Disassembly and reassembly